Views: 12 Author: Site Editor Publish Time: 2023-07-12 Origin: Site
Dynamic maintenance of paper cup machines refers to machine maintenance during the operation of a paper cup machine. Static machine maintenance is a substitute for dynamic machine maintenance and the dynamic operation of the machine can in turn test the level of static machine maintenance. Dynamic machine maintenance is very important.
Dynamic maintenance of paper cup machine
Sometimes the paper cup machine barrel may be misaligned.
The main elements of dynamic maintenance for paper cup machines are
Machine readiness check. Machine readiness can be checked by tapping or cranking. For example, tools and other items stuck inside the machine; whether components are mounted in the right place, which if not, could damage the components or make finding the rules very difficult.
The state of lubrication of the machine. The first thing you can do is to observe whether the machine's oil circuit is clear through the oil mark. If there is no oil in the oil mark or if the oil mark is not visible, stop the machine and check carefully if the oil circuit is leaking. If machines such as plain bearings are used, low speeds are not conducive to their lubrication, especially for pointing or low-speed operation and lubrication. It is therefore advisable to allow the machine to idle and lubricate before carrying out such operations. This is also the first task that should be completed before starting work on every project. Some machines have an oil pump that is driven by the main engine, so when it is reversed, the oil circuit not only fails to refuel but sucks the oil from the circuit back into the oil tank. This is very dangerous and can therefore be avoided. Lubrication of some important parts can also be detected by the temperature of the nearby metal. If the temperature is too high, there is a problem with lubrication.
Vibration during machine operation. The lower the shock during machine operation, the better the result and also the longer the machine changeover time. Reducing the machine speed is another important condition for adjusting the machine's rotational inertia. The lower the speed of the machine, the lower the rotational inertia, so the machine must be manufactured Always run at high speed. The above aspects are only part of the daily maintenance of a paper cup machine. The daily maintenance of the paper cup machine directly affects the replacement of the printing machine and the quality of the product, and should not be taken lightly.
Causes of misalignment.
Firstly: the paper material used in the production of paper cups by the paper cup machine was not flat enough and the operating staff did not place the paper with pleated marks properly.
Second: the push rod part of the paper cup machine has failed to work properly, which in turn makes the paper cup machine paper cylinder misaligned.
Misalignment solutions.
First: the paper folding part of the paper cup machine is very important. If the paper sheet is folded well, the paper sheet misalignment will not happen frequently.
Second: when folding the paper sheet, the paper sheet should be flat and have a good contact surface with the rising suction skin of the paper cup machine, otherwise the suction skin and the paper sheet do not have sufficient contact, which will lead to the paper jam of the paper cup machine and thus cause a series of failures.
If you are interested in purchasing a paper cup machine, visit our website: https://www.xinchenmachine.com/to get more professional information about paper cup machines. We will welcome you with high-quality products and good service as well as low prices! To provide comprehensive technical support to our customers, we will provide technical and other related information promptly upon request.