Operation process of paper cup-making machine

The paper cup-making machine is a mechanical device that automatically processes the coated and printed paper cups into a fan-shaped cup wall and a round cup bottom, and firmly integrates the two through a series of processes.

Here is the content list:

• Preparation work before starting the machine

• The production operation process of the paper cup-making machine

• After stopping the machine

Preparation work before starting the machine

1. Before taking over the shift, the staff will receive the paper, cup bottom, carton, sealant, silicone oil, and other materials needed for the day, check the number of materials received and the remaining materials at work, and report any problems in time.

2. Turn on the power button on the control panel and check whether the source of the paper cup machine is normal and whether the set temperature can reach the predetermined value.

3. Lubricate the moving parts of the paper cup-making machine with a little lubricant, wipe the parts that need to be touched by the product to avoid pollution, and check whether the connecting screws and top wire of the machine running parts are loose.

4. Check the flatness of the paper, whether there is any film removal, spots, front and back side confusion, wrinkling, and other phenomena.

5. Spray the paper sheet with the appropriate amount of water if necessary, and strictly control the time and humidity of the paper sheet.

The production operation process of the paper cup-making machine

1. Turn on the main power supply, heating power supply, and host power supply of paper cup-making machine equipment, heat up for thirty minutes, then turn on the dehumidifier and host motor.

2. Place the cut cup paper, neatly in the work jig. According to the workshop temperature and humidity, wait after watering the paper pieces; installation and debugging of the bottom paper: require the right amount of looseness and tightness, left and right in place.

3. Open the air compressor, supply air to the paper cup machine, set the bottom bonding temperature of 230 ℃ ~ 300 ℃, speed 40-50 only / min; cup wall ultrasonic wave time 2 ~ 3 seconds.

4. Turn on the host switch for a few seconds of trial operation, wait for the bottom paper supply normal, then put down the cup wallpaper fixture, suction cups began to transport the cup wallpaper into the ultrasonic welding.

5. Check the adhesion of the bottom of the cup, whether there is leakage, seepage, and other undesirable phenomena, but also test whether the finished product has no defects, and whether qualified.

After stopping the machine

1. Turn off the console surface power, cut off the total power supply, and close the air valve and silicone oil valve.

2. Clean up the residual paper scraps inside and outside the paper cup-making machine, and pack up the water spray gun and other auxiliary tools.

3. Tidy up the working environment, clean up the hygiene and keep the paper cup machine in a clean condition.

The above is the relevant content about the operation process of the paper cup-making machine. If you are interested in a paper cup machine, you can contact us, our website is www.xinchenmachine.com. We sincerely look forward to establishing business cooperation with you and warmly welcome you to contact us for more details.