Paper cup machine work and maintenance knowledge during production

The paper cup-making machine is a multi-station automatic forming machine that automatically processes fan-shaped paper into paper cups. It is an ideal piece of equipment for producing paper beverage cups, tea cups, coffee cups, advertising paper cups, ice cream paper cups, or other food cone-shaped containers.

Here is the content list:

• The work of the paper cup machine during production

• General knowledge of paper cup machine maintenance

The work of the paper cup machine during production

1. After the preparatory work is completed, when starting the motor, tell the staff present that the paper cup machine is about to start working. This is to avoid unnecessary accidents caused by the operator not discovering the operation of the paper cup machine when the mechanic is repairing behind the machine.

2. Carefully observe the operation of the machine, first, take a paper cup to check the paper cup bonding effect: preheat main heat, knurling at the yellowing, damage to the paper cup.

3. Check the bonding effect at the bonding place, there is no indirect bad situation, the bottom of the cup and bonding firmness for tearing the phenomenon of hair pulling is appropriate, there is indirectly not hair pulling is suspected of leaking cup, by measuring the water test shall prevail.

4. In the normal operation of the paper cup machine, if you find or feel that the machine has abnormalities, you should first lift the cup, and wait for a paper cup over the knurling before stopping to check.

5. When stopping the machine unexpectedly for a long time, check whether the knurled part of the paper cup is bonded.

6. Paper cup-making machine operators should pay attention to the forming condition of the cup mouth, cup body, and cup bottom at any time during normal production, and check the bonding and size appearance of cups from time to time or check them one by one.

7. Employees should concentrate when operating, and if they find that the paper cup machine has an abnormal sound or the bottom of the cup is not well-formed, they should stop the machine immediately for inspection to prevent greater losses.

8. Before sealing the carton, the operator should randomly check the number of small packages, and cut and paste the product certificate or product pattern on the upper right corner of the left side of the carton after the random check is correct, fill in the work number and production date inside the carton, and seal the carton and stack it neatly to the designated position.

General knowledge of Paper cup machine maintenance

The first thing is to do a good job on the cleanliness of the knife mouth of the paper cup-making machine, can not be too much lint ball, especially pay attention not to get wet, because after getting wet, the knife mouth of the paper cup machine is easy to stick on the line ball and thread end, so always keep the knife mouth cleanliness and sharpness, which is to ensure accurate and fast cutting hairball conditions. And we should check the lubrication of the bearing zero firmware between the paper cup machine in time to prevent the machinery from rotting and rusting, and reduce the operation speed.

The above is the relevant content about the paper cup machine work and maintenance knowledge during production. If you are interested in a paper cup-making machine, you can contact us, our website is www.xinchenmachine.com.